描述

Each package has 50 main bodies, 50 steel needles

Min order quantity: 5 bags

1. For 1.5mm seam, you can directly use a leveler (no need to use a cross card) for 2mm or more (it can be used with the cross card of our shop for better effect).

2. When looking for ceramic tiles, you must clean the cement or ceramic tile glue around the steel needle.

3. After 4-6 hours of tile leveling, you need to take out the leveler before the cement or ceramic tile glue is dry

High quality PP plastic is a semi crystalline thermoplastic. It has high impact resistance, strong mechanical properties, and resistance to various organic solvents and acid-base corrosion.

Square hardened stainless steel is an upgraded version of square hardened stainless steel, which not only improves the hardness. The square design protects the tiles to a greater extent and is not easy to damage the tiles when taken out.

Product usage:

1,The first tile shall be paved and the reserved joint shall be ≥ 2mm (it is better to match with the cross clamp) close to the adjacent tiles.

2, insert the T-shaped needle along the tile gap.

3, then, rotate 90 degrees to clamp the t-pin at the bottom of the two tiles.

4, tighten the adjusting cover clockwise with the adjusting wrench until the two brick surfaces are on the same level

 

Replaceable needle leveler steel nail replacement display